About Me

Full Name

Mahmoud Abdallah

Phone Number

01005174037

Job Title

Authorized Training Instructor, ASME

Bio


  • ASME B31 Committee member,

  • ASME Authorized Training Instructor, 

  • President of Society of Piping Engineers and Designers-Egypt Chapter

  • Certified as Value Methodology Associate VMA from SAVE® International 

  • Head of Department -Plant Layout and Piping, thyssenKrupp Uhde. 

  • Certified as Pan-Arab Energy Management Professional.

2 Enrolled Courses
2 Active Courses
0 Completed Courses

Courses Taken

Beginner

Stepping into Piping Engineering – Components

To start in such a field, we introduce a fundamental …

6,300 EGP

Stepping into Piping Engineering – Components

16 hours
Beginner
What you'll learn
What is Piping Engineering.
Piping Engineers Roles and Responsibilities.
Detailed study of Piping Network Components.
Intermediate

B31.1 Power Piping

Employ the ASME B31.1 requirements throughout the entire system lifecycle …

11,980 EGP

B31.1 Power Piping

19 Lessons
30 hours
Intermediate
What you'll learn
Identify the difference between “Design by Rule” and “Design by Analysis” codes.
Discover the principal failure modes of piping components and where to look for them.
Recognize the difference between pressure component design and structural design.
Investigate the importance of piping flexibility.
Discuss how to develop stress intensification factors.
Recognize how to qualify nonstandard fittings and joints.
Identify materials selection and limitations, fabrication rules and their bases
Explain welding qualification requirements, inspection, examination, and testing requirements
Identify the Code requirements for power piping maintenance
Intermediate

B31.3 Process Piping

Apply the ASME B31.3 Code requirements throughout the entire process …

11,980 EGP

(8)

B31.3 Process Piping

5.0/5
(8 ratings)
26 Lessons
30 hours
Intermediate
What you'll learn
Identify the responsibilities of personnel involved in the design, fabrication, assembly, erection, examination, inspection, and testing of process piping
Describe the scope and technical requirements of the ASME B31.3 Code
Apply and implement the quality requirements that are defined in the ASME B31.3 Code
Featured
Beginner

ASME B31.12 Hydrogen Piping and Pipelines

ASME B31.12 Standard on Hydrogen Piping and Pipelines contains requirements …

11,980 EGP

ASME B31.12 Hydrogen Piping and Pipelines

19 Lessons
30 hours
Beginner
What you'll learn
Hydrogen Technologies and Market Players
Global Policies
Describe the scope of B31.12
Explain the design requirements of B31.12
Identify materials requirements
Explain B31.12 requirements for fabrication, assembly, and erection
Explain the B31.12 requirements for inspection, examination, and testing
Intermediate

Function Analysis Guide

The course provides a complete exploration of SAVE International Function …

3,500 EGP

Function Analysis Guide

10 hours
Intermediate
What you'll learn
Provide strong background on Value Engineering in highway and transportation.
Support in establishment of Organization VE program.
Train VE team on program management.
Intermediate

Writing Technical Proposal to attract and win clients

Today, a record number of people are going into business …

3,500 EGP

Writing Technical Proposal to attract and win clients

10 hours
Intermediate
What you'll learn
Understanding the core of your business
Enhancing proposal writing process
Client management
Intermediate

FAST Creativity and innovation, Rapidly Improving Processes, Product Development and Solving Complex Problems

FAST technique  reduces the time for complex audit and analysis …

3,500 EGP

FAST Creativity and innovation, Rapidly Improving Processes, Product Development and Solving Complex Problems

Intermediate
What you'll learn
Rapidly improving process, product development and solving complex problems
Expert

Professional Piping Lead Engineer

Certainly, a group of professionals work together in order to …

19,800 EGP

Professional Piping Lead Engineer

5 Lessons
30 hours
Expert
What you'll learn
Overview on project management
Setting and achieve success criteria
Piping Lead engineer management approaches
Path forward of Lead Engineer
Intermediate

A Guide to the Value Methodology Body of Knowledge (VM Guide)

The course provides a complete exploration of SAVE International VM …

5,800 EGP

A Guide to the Value Methodology Body of Knowledge (VM Guide)

20 hours
Intermediate
What you'll learn
Provide strong background on Value Engineering in highway and transportation.
Support in establishment of Organization VE program.
Train VE team on program management.
Intermediate

Guidelines for Value Engineering in Highway and Transportation Organizations

Organizations recognizes the need for the prudent use of resources …

5,800 EGP

Guidelines for Value Engineering in Highway and Transportation Organizations

20 hours
Intermediate
What you'll learn
Provide strong background on Value Engineering in highway and transportation.
Support in establishment of Organization VE program.
Train VE team on program management.
Intermediate

Wind Energy, from academic and Industrial perspectives

The adoption of renewable energy sources like wind and solar …

10,500 EGP

Wind Energy, from academic and Industrial perspectives

30 hours
Intermediate
What you'll learn
Shed a light on renewable energy.
Increase trainee awareness for wind energy.
Provide Engineering background on wind turbine design from mechanical and civil perspectives.
Intermediate

Energy Management and Efficiency for process plant

Energy sustainability plays a crucial role in the well-being and …

10,500 EGP

Energy Management and Efficiency for process plant

20 hours
Intermediate
What you'll learn
provide a concise overview of energy management principles and techniques for the process industries.
Be aware of international standards relevant to Energy Management.
Train team on program management.
Expert

What Went Wrong: Case Histories of Process Plant Disasters Learn from accidents. Plant Layout issues

ASME Codes establishment motivators were accidents. Lessons leaned is a …

15,000 EGP

What Went Wrong: Case Histories of Process Plant Disasters Learn from accidents. Plant Layout issues

20 hours
Expert
What you'll learn
Awareness of how safety has no tolerance.
Provide a way to handle different design issues.
Show the importance of organizing Lessons Learned smart database.
All Levels

Root Cause Analysis, the right tool

This course to root cause analysis (RCA) is intended to …

5,000 EGP

Root Cause Analysis, the right tool

20 hours
All Levels
What you'll learn
Provide a guide to empirically investigating quality failures using the scientific method in the form of cycles of Plan-Do-Check-Act (PDCA) supported by the use of quality tools.
Featured
Intermediate

Piping Flexibility and Support

Flexibility is a crucial topic in Process Piping Engineering. Almost, …

12,000 EGP

Piping Flexibility and Support

30 hours
Intermediate
What you'll learn
Paving the way of piping designer to consider code provision.
Provide mandatory introduction to piping stress engineering.
Complete awareness on piping supporting system for construction and maintenance engineers.
Featured
Intermediate

ASME BPV Code, Section VIII, Division 2: Design & Fabrication of Pressure Vessels

This introductory course describes the use of alternative rules for …

11,980 EGP

ASME BPV Code, Section VIII, Division 2: Design & Fabrication of Pressure Vessels

23 hours
Intermediate
What you'll learn
Explain how the requirements of Divisions 1 and 2 of Section VIII compare
Explain the theories of failure and design margins of various codes
Identify the general requirements of the new Division 2
Describe design rules and stress analysis methods
Explain fatigue analysis
Identify materials and fabrication requirements
Identify NDE requirements, pressure testing, and pressure relief requirements
Intermediate

Fundamentals of Pumps and Their Selection for Optimum System Performance

Learn the fundamentals, selection, installation, operation, maintenance, and troubleshooting of …

11,890 EGP

Fundamentals of Pumps and Their Selection for Optimum System Performance

30 hours
Intermediate
What you'll learn
Calculate the pressure loss in a pipeline due to friction for circular and non circular ducts
Determine the pipe diameter that minimizes first plus operating costs of a piping system
Generate a system curve for a pipeline
Identify the testing methods used to obtain a performance map for a centrifugal pump
Employ the system curve to select an efficient centrifugal pump
Explain how to predict when cavitation will occur and identify the necessary steps to avoid it
Explain how to use dimensional analysis to correlate experimental data for a pump
Explain how the specific speed is determined
Apply affinity laws to predict off-design behavior for a pump
Identify types of positive displacement pumps
Examine common methods of measuring flow rate in a pipeline
Identify the types of meters available for flow rate measurement
Generate calibration curves for venturi, orifice, and elbow meters
Describe the different types of valves that are commercially available
Explain how to select the correct valve for a piping system
Identify and avoid problems by selecting the correct valve
Explain how to install, operate and maintain valves
Describe the process of diagnosing and troubleshooting valve problems
Intermediate

Principles of Welding

This course provides an introduction to the principles of welding …

5,800 EGP

Principles of Welding

31 Lessons
10.5 hours
Intermediate
What you'll learn
You Will Learn To:
Explain how to use and application of common welding processes
Describe basic weld design concepts, such as weld size determination and communication through weld and welding symbols on drawings
Explain how welding affects various welded materials, including metallurgical and dimensional changes
Describe the advantages and disadvantages of various arc-welding processes
Identify basic electric circuits that are used to accomplish arc welding
Identify weld inspection techniques, including non-destructive examination
Identify common problems with welding processes and explain how to troubleshoot them.
Intermediate

Bolted Joints and Gasket Behavior

Understand bolted joint fundamentals and gasketed joint torque factors, bolting …

11,980 EGP

Bolted Joints and Gasket Behavior

51 Lessons
30 hours
Intermediate
What you'll learn
Explain how the bolted joint functions as a mechanical system that relies on the simultaneous interaction of the three primary components to successfully seal the connection
Assess the mechanical stress and strain of a bolt and explain the challenges that one encounters when specifying an optimum bolt load
Evaluate the total state of stress in bolts and how this effects the selection of a given bolt type and grade
Describe the effects of in-service conditions and how they reduce or increase bolt load
Describe the concept of leak tightness as a predictable value of gasket stress and how to use leak tightness as the basis of specifying bolt loads
Identify conditions that create bolt failure
Use ASME PCC-1 Guidelines for compliance to successful sealing of bolted, gasketed connections
Discern how to use either stress or strain to select bolt load
Evaluate the various methods of attaining bolt load.
Intermediate

B31.8 Gas Transmission & Distribution Piping System

Gain an understanding of ASME B31.8 including design, operation, maintenance, …

11,980 EGP

B31.8 Gas Transmission & Distribution Piping System

14 Lessons
30 hours
Intermediate
What you'll learn
Explain the causes and modes of pipeline failure
Describe the considerations for material specifications, pipe manufacturing, and pipe joining
Estimate pipeline stresses from external loading
Explain how to evaluate pipeline defects
Identify pipeline repair techniques
Identify the elements of pipeline integrity
Explain how code requirements address these issues
Explain the differences between B31.8 and US DOT gas pipeline regulations
Intermediate

Design of Bolted Flange Joints

Understand and apply ASME codes and standards for bolted flange …

11,980 EGP

Design of Bolted Flange Joints

15 Lessons
30 hours
Intermediate
What you'll learn
You Will Learn To
Develop an awareness of flange types and the ASME codes and standards applicable for bolted flange joint design
Enhance your knowledge for designing and analyzing bolted flange joints
Explain how the flange design interacts with bolts and gaskets to achieve a leak tight joint
Identify the parameters that can affect flange sealing along with methods to troubleshoot and remediate flange leakage

Be the first Blog Reader

We don’t spam! Read our privacy policy for more info.

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
Click outside to hide the comparison bar
Compare